UltraTech Super Stucco

Ultra Tech Super Stucco is a versatile facing material that can be applied to any flat or undulating surface and can be used as a base coat for interiors or as final finish for exteriors. Ultra Tech Super Stuccocan be applied directly over smooth concrete surfaces without hacking and generally requires no curing after application.

• Super Stucco is used as a coating on walls and ceilings
• Application can be manual or sprayed by machine
• It can be applied directly on a concrete surface. No hacking is required
• Super Stucco can be used as a base coat on plasters for interiors that can be painted after 24 hrs
• Only water needs to be mixed
• SUPER STUCCO has a very high tensile adhesion strength, thus has higher bonding with the base material
• Does not require any water curing
• SUPER STUCCO is pre-mixed and hence hassle-free, involving no cumbersome mixing of cement and sand on site
• Mixing is easier and application is much faster
• The application can be as thin as 2-3mm or as thick as 8-10 mm, depending upon the requirement
• UltraTech Super Stucco can be used as a crack filler for external walls, for repairs of old plastered surfaces, for repair of shrinkage cracks in parapet walls, for repairs after plumbing/electrical works etc

• Highly economical. Eliminates the lengthy, cumbersome process of transporting individual materials and mixing on-site
• Saves time and labour as it comes pre-mixed, requiring only water to be mixed on site
• Consistent and assured quality, as it comes pre-mixed
• No water curing required
• No crack formation during drilling or plumbing work
• Does not flake when in contact with moisture
• Cement based, allowing better bonding with the substrate
• Allows subsequent application of putty or paint just 24 hrs after application
• Provides better breathability for walls
• Can be applied over moist surfaces
• Highly durable
• Excellent crack-filling properties

Application

• UltraTech Super Stucco can be applied on the surface manually with a trowel
• After thoroughly mixing the Super Stucco, apply the first coat on the moistened wall surface uniformly, going upward from the bottom. This will ensure minimum wastage and a proper finish.